|
W Smaller
Working Diameters
With Standard Equipment
IN-LINE BORING
Starting from ø 22 mm to over ø 70 mm
OVERLAY WELDING
Internal– from ø 25 mm to over ø 400 mm
External- from ø 20 mm to over ø 400 mm
Accessory kits
KIT 2000 from ø 25 mm to over ø 90 mm
For facing bosses, creating circlip grooves, external machines.
Upon request, we can supply:
• Personalized kits for specific machining or applications.
Photo Gallery
W Smaller
Video gallery application
• In line borning1 - Smaller
• In line borning1 - Smaller
• Set-Up: In line borning
• Set-Up: Overlay welding
• Set-Up: Centering
Machine Size
| Technical Characteristics |
| TOOL HOLDER SHAFT
DIAMETER |
mm
|
20 ( 0,79 in ) |
| TOOL HOLDER SHAFT LENGTH |
mm
|
1950 usable mm (N° 2 connectable bars (1000mm+1000mm)
|
| BORING DIAMETER |
mm
|
22 - 70 ( 0,87 in – 2,76 in ) |
| WELDING DIAMETER |
mm
|
25 - 400 ( 0,98 in – 15,75 in ) |
| WELDING TECHNOLOGY |
|
SPIRAL (CONTINUOUS WITH VARIABLE STEP) |
| LONGITUDINAL STROKE |
mm
|
UNLIMITED WITH STEP OF 80 mm (3,15 in) |
| ROTATION MOTOR |
mm
|
C/C (CE COMPLIANT) |
| FEED MOTOR |
mm
|
C/C (CE COMPLIANT) |
| FEED SYSTEM |
mm
|
ELECTRIC-MECHANICAL |
| OUTPUT TORQUE AT THE BAR |
mm
|
46,5 Nm ( 400 Rpm ) |
| MAX ROTATION SPEED |
rpm
|
400 |
| FEED RATE |
mm/rpm
|
0 - 0,3 ( 0 – 0,01 in / rev ) |
| MAX FEED SPEED(w/rapid button) |
mm/min
|
130 |
| REMOVAL MATERIAL |
cm³/min
|
18 |
| DRIVE UNIT WEIGHT |
kg
|
12 |
| Standard Equipment |
| N° 1 DRIVE UNIT, |
| N° 1 CONTROL PANEL |
| N° 1 CABLE FOR CONTROL PANEL |
| N° 1 CONTROL PANEL HOLDER |
| N° 2 CONNECTABLE TOOL-HOLDER SHAFTS Ø 20 MM LGTH. 1000
MM + 1000 MM: TOTAL USABLE LGTH 1950 MM |
| N° 4 BEARING CARRIERS |
| N° 12 EXTENSION BRACKETS FOR ADJUSTING DIAMETERS LGTH.
MM 60 |
| N° 1 CENTERING KIT (2 RINGS - 6 BOSSES- 6
SCREWS M10 X 100 mm) |
| N° 5 CARBIDE INSERTS |
| N° 1 TOOL-HOLDER S8x25 MM (COMPLETE WITH
WRENCH AND TORX SCREWS) |
| N° 1 TOOL HOLDER EXTENSION Ø 50 MM |
| N° 1 COMPASS (device for measuring
internal diameters) |
| N° 1 MICROSPAND (device used for centering) |
| N° 1 COMPARATOR 1/100 |
| N° 2 COMPARATOR HOLDERS 8/8 |
| N° 1 COMPARATOR EXTENSION |
| N° 1 TORCH CABLE WITH EUR ATTACHMENT |
| N° 1 WELDING TORCH SHAFT Ø 20 MM x 1000 MM
LGTH |
| N° 4 TORCH HEADS FOR INTERNAL OVERLAY WELDING C/w
WELDING WIRE NOZZLES AND GAS DIFFUSER (M 70 MM x C 90 MM x B
125 MM x G 180 MM) |
| N° 1 TORCH HEAD FOR EXTERNAL OVERLAY
WELDING C/w WELDING WIRE NOZZLES AND GAS DIFFUSER (A 320 MM) |
| N° 3 TORCH HEAD EXTENSIONS (D 55 MM x E 45 MM x H 135
MM) |
| N° 1 SUPPORT-HOLDER PLATE |
| N° 3 SUPPORT-HOLDER PLATE BRACKETS 180 MM |
| N° 3 THREADED RODS (M10x200 mm) FOR
SUPPORT-HOLDER PLATE WITH DOUBLE NUT (6 NUTS M10) |
| N° 1 LATHED WELDING WIRE NOZZLE Ø 0,8 MM |
| N° 2 SHORT WELDING WIRE NOZZLES Ø 0,8 MM -
Ø 1 MM |
| N° 2 LONG WELDING WIRE NOZZLES Ø 0,8 MM - Ø 1 MM |
| WRENCHES |
| OPERATION MANUAL |
| N° 1 TROLLEY (for containing all the
standard kit) |
| KIT |
|
| KIT 2000/ ø 20 FACING HEAD |
For facing bosses, creating
circlip grooves, external machining
Composed of:
· N° 1 gear group
· N° 3 brackets 20x20x200 mm
· N° 3 brackets 20x15x130 mm
· N° 1 hexagonal wrench 3 mm
· N° 1 fixed wrench 13 |
Upon request we can supply personalized
kits for specific
machining or applications
CERTIFIED TEST – STEEL C45
| DIAMETER |
mm |
Ø30 |
Ø70 |
| CUTTING DEPTH |
mm |
6 in the radius
12 in the diameter |
3 in the radius
6 in the diameter |
| FEED SPEED |
mm/min |
6 |
3 |
Control Panel An electronic circuit has been inserted
to guarantee a major safety in operation and to safeguard the rotation motor
from excessive strain in case of an incorrect setup of the parameters, as well
as to compensate possible critical points in machining. It automatically and
proportionally reduces the feeding speed to reach the maximum strain point of
the rotation motor, in order to dynamically reduce the load of the work, without
passing the stop point for protection.
Thanks to the led bar called STP, it is possible to constantly monitor the
motor’s work load, so to be able to optimize the choice of the parameters
(rotation speed and feed speed), based on the hardness of the material, the
type of tool being used, to the machining diameter and to routing diameter of
the tool. Furthermore, the bar signals in advance the alarm condition and the
subsequent shut down of the control panel, flashing until the working conditions
are restored.
The technical characteristics include:
AC 110 ~ 220 50 / 60 HZ WITH AUTOSELECTION OF MAINS VOLTAGE, WITHOUT THE USE
OF TRANSFORMERS OR INVERTERS; ELIMINATING ELECTROMAGNETIC INTERFERENCES
ESPS ® TORQUE ELECTRONIC RUNNING OF THE TWO MOTORS WITH ELECTROMECHANIC
SYNCHRONIZATION
DISPLAY FOR SPEED OF ROTATION REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE
RUNNING OF THE ROTATION MOTOR
DISPLAY FOR SPEED OF FEEDING REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE
RUNNING OF THE FEEDING MOTOR
MAIN SWITCH
EMERGENCY SWITCH
INVERTER DX/SX FOR FEEDING
INVERTER DX/SX FOR ROTATION
POTENTIOMETER FOR ROTATION REGULATION
POTENTIOMETER FOR FEEDING REGULATION
SWITCH FOR RAPID TRANSLATION OF THE SHAFT
|
Are you trying to inquire about a part
or check availability of a product or a solution service?
Please either call / WhatsApp (60) 19 333 9484 at or email us at
wso@assurich.com.my
or submit an enquiry form
online. |
|
