|
PortFlow Analyzer
Accelerates Your Cylinder
Head Port AnalysisDigital Airflow
Measurement System Software for faster, more
accurate testing on your SuperFlow flowbench.
- Uses the latest technology
- Save time entering data
- Minimize mistakes
- Make a professional impression
- See why some heads make more power than
others
- Compare various head/cam/engine combinations
for the desired type of performance
- "Database" your heads for fast retrieval and
comparisons
Port Flow Analyzer Basic Software
- Display, record and print your flowbench data
- Runs on Microsoft™ Windows
- Requires FlowCom™
- Includes test pressure conversion utility
- Stores up to 30 lift points
- Compare data from different cylinder heads or
tests
- Upgradeable to PortFlow Analyzer Pro
Port Flow Analyzer Pro Software
Includes all the basic software features PLUS:
- A variety of performance calculations
- Input data from swirl or tumble meters
- Performs port mapping when using velocity probes
- Customize graphs and printed reports
|
|
|
 |
Motor Controller
Automatically Regulate Test
Pressure
The optional motor controller automatically regulates test
pressure. The FlowCom™ digital air flow computer is
necessary for operation. The units are available for the
SF-110, SF-120, and SF-600 flowbenches. |
|
Velocity Probes (Pitot Tubes)
Measure Intake and Exhaust Air
SuperFlow velocity probes measure intake and exhaust air
velocity via three different styles of probes. Use them to
get a baseline and then again after you’ve completed your
head work to measure improvement. When paired with PortFlow
Analyzer Pro Software from Performance Trends you can create
detailed port velocity maps to see high and low areas in
each port.
Exhaust Probes
- 90° bend to reach easily in exhaust ports
- Includes vinyl tubing and brass fittings
- 13 ˝ ” long
- *Requires second manometer or FlowCom™
Intake Probes
- 180° bend to reach easily into intake ports
- Included vinyl tubing and brass fittings
- 13 ˝” long; J-bend length 1 ˝”; J-bend width ľ ”
- *Requires second manometer or FlowCom™
Tight Radius Velocity Probe
- .600” tight radius 180° bend for testing small ports
found on Briggs and other small engines
- *Requires second manometer or FlowCom™
|
|
|
Aluminium Flow Test Stand
|
Cylinder Head
Adapters
We offer many different acrylic and aluminum cylinder head
adapters for V-8, metric and VW heads. The aluminum flow
test stand is available with removable bore cylinders for a
wide variety of testing possibilities. Add an adjustable
slider plate for even quicker testing; available
applications include: Small Block Chevy, Ford, Early Big
Block Chevy, Gen V and VI Big Block Chevy and custom slider
plates. Call a SuperFlow sales engineer today to determine
the exact products for your flow testing requirements.
V-8 Head Adapter |
|
|
 |
FlowCom
Make Airflow Testing Quick and Easy
Faster, More Accurate Airflow Testing
FlowCom™ automatically measures test pressure and
temperature and shows corrected flow on its easy-to-read,
graphical display. FlowCom can automatically regulate test
pressure with the optional motor controller. Select the test
pressure at the beginning of the test, and FlowCom regulates
the pressure as the valve lift (or test orifice size)
changes. FlowCom can control to test pressure or airflow (cfm).
|
All data can be simultaneously transmitted in real
time to your computer through its serial or Universal
Serial Bus (USB) connection. FlowCom can communicate
with WinDyn™ for flowbenches and Port Flow Analyzer
software for airflow data analysis.
If preferred, you may record results manually on
SuperFlow-supplied forms and can freeze the data at each
test point using the FlowCom keypad or a hand- or
foot-operated push button.
You can connect a velocity probe to the FlowCom inputs
to display air speeds. Connect a strain gauge,
frequency-based swirl meter, or tumble meter, and
FlowCom displays swirl torque or swirl per unit of flow.
Features
- Automatically calculates, corrects, and shows
flow on the large graphic display
- Automatically regulates test pressure with
optional motor controller
- Perform cylinder head port tests in a fraction
of the time needed for testing without FlowCom™
- Control to test pressure or airflow (cfm)
- External velocity probe, swirl-and-tumble-meter
input
- Compact, lightweight microprocessor design is
self-contained, so no computer is necessary
- Rugged construction to withstand harsh shop
environments
- Easy-to-clean, bubble-button keypad
- Large numeric keypad for rapid data entry.
- Works with computer equipped with optional
WinDyn™ for flowbenches and Port Flow Analyzer™
airflow analysis software
- FlowCom™ is available factory-installed or as a
retrofit on other SuperFlow flowbenches
- Firmware upgrades are easy to perform using the
USB interface
 |
|
|
 |
Manometers
For testing with Pitot Tubes or for
Carburetor Signal Testing
For customers with manometer style benches SuperFlow offers
additional manometers for testing with pitot tubes or for
carburetor input signal testing. Two sizes are available,
16” for SF-110 and SF-120, and 48” for the SF-600. In all
cases the additional manometer mounts to the side of the
flowbench with the included bracket and hardware.
|
|
|
 |
Universal Valve
Opening Bar
The universal valve opening bar fits everything from
4-cylinders to big-block Chevy heads. It can easily be
equipped with a dial indicator to quickly and accurately
measure valve lift at any point. For applications with 4
valves per cylinder the bar can be equipped with a second
dial indicator and a two valve opening assembly. Add a set
of center bolt valve cover adapters and flow testing springs
for the ultimate setup. Call a SuperFlow sales engineer
today for more information.
|
|
|
 |
Radius Inlet
Flow Guides
SuperFlow also offers acrylic radius inlet flow guides for a
variety of applications. These CNC machined guides have a ˝
” radius and are ľ ” thick. Guides are available for most
common gasket sizes or we can create a custom flow guide to
your specifications. Call a SuperFlow sales engineer today
for more information.
|
|
|
 |
Automatic Valve Actuator
The automatic valve opener fits standard automotive cylinder
heads. It’s compact, rugged aluminum design provides years
of service. The included mounting brackets adjust to most
any valve angle and the valve opener’s 2in. (51cm) stroke
makes setup easy. The required Port Flow Analyzer Software
is configured for over 50 different lifts in most any order,
either opening or closing the valve. The precision stepper
motor has a resolution of .0001in. (.0025mm) and allows the
valve to open or close in increments as small as .010in.
(.25mm). Contact a SuperFlow sales engineer today for more
information.
* Main Body Dimensions: 3.5” x 2” x 2” (90 x 51 x 51 mm)
* USB connection works with most computers (requires 110 or
220 VAC power and USB connector)
* *Requires FlowCom™ Digital Air Flow Measurement system
* *Requires Port Flow Analyzer Pro Software
|
|
|
 |
Orifice Calibration Plates
SuperFlow offers a full set of 18 orifice calibration
plates. These plates are NIST traceable and they are ideal
for ISO or quality certifications.
|
|
|
|
|
Briggs Head Adapter
|
Motorcycle and
Small Engine Test Fixtures
SuperFlow offers a wide range of flowbench adapters for
motorcycles, go-kart's and other small engines. Applications
include Harley Davidson, import motorcycles and Briggs and
Stratton. Contact a SuperFlow sales engineer today for more
information.
Briggs Test Kit |
|
|
 |
Carburetor Test Fixtures
SuperFlow offers carburetor test fixtures for many different
applications. Sliding plates allow you to test individual
venturis or up to 4 in combination. Contact a SuperFlow
sales engineer for information on what we have available for
your needs.
|
|
|
 |
Swirl Meter
The Swirl Meter by Performance Trends accurately
measures the motion of the incoming fuel/air charge. It
features a three position switch to select update speed,
averages and minimum and maximum values for a given period
of time. Its low flow restriction design saves you time
because it measures swirl at the same time as intake flow.
The swirl meter’s rugged aluminum and stainless steel design
hold up to the toughest shop environments while two 20,000
rpm, low friction bearings provide accurate and repeatable
readings. The easy-to-read digital readout has a range of
-9,999 - 9,999 rpm with a resolution of 1 rpm (negative
readings represent counterclockwise swirl). Contact a
SuperFlow sales engineer today to learn more about swirl
testing on your SuperFlow flowbench.
- Fits any standard SuperFlow flowbench
- Can be integrated with FlowCom™ Digital Airflow
Measurement system
|
|
Downloads