BMT 1440E

BMT 1440VE
 

 

BMT 1340E/ 1440E/ 1440VE

FEATURES : High tensile & seasoned cast iron for lathe bed and headstock Both headstock and lathe bed are strengthened with ribs for best rigidity and stability Hardened & ground bed ways Hardened & ground headstock gears Fabricated steel stand Chips tray removable from front Leadscrew and feed rod equipped with overload safety cluth STANDARD ACCESSOREIES : 2HP, 1ph or 3HP, 3ph , 4P main drive motor(1340E/ 1440E) 3HP 3ph, 6P main drive motor (1440VE) 5HP frequency inverter (1440VE) Rapid foor brake 4-way tool post 6" & 8" back plates (D1-4) Thread dial Gap bed Center, MT3 Center sleeve MT5 x 3 Set of change gears Tool box & tools Complete electric control unit Dual dials 3-jaw flat back scroll chuck 6" with 2 sets of jaw 4-jaw flat back independent cjuck 8" Face plate 10" Steady rest Follow rest Rear splash guard 1/8HP coolant pump OPTIONAL ACCESSOREIES : Quick change tool post Single tool post Taper turning attachment Carriage micro stop Live center MT3 Work lamp Drill chuck 13mm with arbor Chuck guard 4-position carriage stop Milling attachment CE electrics and leadscrew cover CSA electrics

SPECIFICATION :  MODEL BMT 1340 / 1440E BMT 1440VE  SWING OVER BED 330 / 360mm 360 mm  SWING OVER CROSS SLIDE 195 / 225 mm 225 mm  DISTANCE BETWEEN CENTERS 1000 mm 1000 mm  SWING OVER GAP 490 / 520 mm 520 mm  BED WIDTH 190 mm 230 mm  NO. OF SPINDLE SPEEDS 9 speeds 2 ranges  RANGE OF SPINDLE SPEEDS 80~2000 RPM High: 340~2200 RPM Low: 36~340 RPM  HOLE THROUGH SPINDLE 40 mm  SPINDL NOSE D1-4 Camlock  TAPER OF SPINDL BORE MT5  TAILSTOCK QUILL TAPER MT3  TAILSTOCK QUILL TRAVEL 110 mm  CROSS SLIDE TRAVEL 175 mm 195 mm  COMPOUND REST TRAVEL 100 mm  METRIC THREADS (30) 0.4~7.0 mm  INCH THREADS (32) 3~56 TPI  LONGITUDINAL FEEDS 0.068~0.936 mm  CROSS FEEDS 0.034~0.468 mm  MAIN MOTOR 2HP, 1ph or 3HP, 3ph , 4P 3HP, 3ph, 6P  MACHINE NET WEIGHT 600 / 620 kgs 2 HP (1.5kw), DC motor-220V or 400V  CRATE DIMENSION(L x W x H) 1905 x 762 x 1473 mm 1930 x 813 x 1524 mm *The above specitications are subject to change without prior notice.