BMT 35PA/ 40PA/ 45PA/ 50PA

SPECIFICATION:  MODEL BMT 35PA BMT 40PA BMT 45PA BMT 50PA  CAPACITY  CENTER HEIGHT 440mm 505mm 568mm 638mm  SWING OVER BED 880mm 1010mm 1135mm 1270mm  SWING OVER CROSS  SLIDE 610mm 740mm 870mm 1010mm  SWING OVER GAP 1340mm 1470mm 1600mm 1740mm  GAP WIDTH FROM   HEADSTOCK 600mm  DISTANCE BETWEEN   CENTERS 1500/200/2500/3000/3500/ 4000/5000/6000/7000/8000/9000/10000/11000/12000mm  BED  WIDTH (W/O   AUXILIARY GUIDE) 560mm  WIDTH (W   AUXILIARY GUIDE) 660mm  HEADSTOCK  SPINDLE NOSE A2-11 A2-15  SPINDLE BORE 153mm 230mm  SPINDLE STEP 18 STEPS (Manual)  SPINDLE   SPEEDS 1 RANGE (RPM) - 2 RANGE (RPM) - 3 RANGE (RPM) - 4 RANGE (RPM) -  CARRIAGE  CROSS SLIDE   TRAVEL 670mm  COMPOUND REST   TRAVEL 450mm  THREAD FEEDS RANGE  LONGITUDINAL FEED 0.045~2.55 mm/rev.  CROSS FEED 0.023~1.28 mm/rev.  LONGITUDINAL   RAPID FEED 2000 mm/min. (80 KINDS)  CROSS RAPID FEED 1270 mm/min. (50 KINDS)  METRIC THREAD 1~56 mm (60 KINDS)  INCH THREAD 1/2~28TPI (60 KINDS)  MODULE THREAD 0.25~14 MOD (60 KINDS)  DIAMETRAL PITCH   THREAD 2~112DP (60 KINDS)  PITCH OF  LEADSCREW 12 mm (2 TPI)  TAILSTOCK  QUILL DIAMETER 115 mm  QUILL TRAVEL 200 mm  INER TAPER OF  QUILL MT.NO.6  BEARING SURFACE  ON BED WAYS 500 mm  MOTOR  MAIN SPINDLE   MOTOR 15kw (20HP) , OPT.-22.5kw(30HP) / 30kw (40HP)  COOLANT PUMP   MOTOR 0.1kw(0.125HP)  WEIGHT  2000mm CENTER   DISTANCE 10000 KGS 10350 KGS 10700 KGS 11050 KGS *The above specifications are subject to change without prior notice.