BMT 2160HL

 

BMT 2140HL/ 2160HL/ 2180HL/ 21120HL

SPECIFICATION:  MODEL BMT 2140HL BMT 2160HL BMT 2180HL BMT 21120HL  CAPACITY  NO. OF CONTROL AXIS 2 axis  SWING OVER BED Ø533mm  STD. D1-8 DISTANCE   BETWEEN CENTERS 845mm 1345mm 1845mm 2845mm  MAX.   WORKING   LENGTH  (D1-8-STD.) 4 WAY TOOL POST 620mm 1120mm 1620mm 2620mm HYD. P8 TURRET 530mm 1030mm 1530mm 2530mm HYD. VDI DISC 490mm 990mm 1490mm 2490mm  MAX. WORKING DIA. Ø350mm  WIDTH OF BED 345mm  HEAD STOCK AND MAIN SPINDLE  SPINDLE NOSE,  INTERNAL TAPER D1-8 (OPT.-A2-8, Ø85mm, Taper 1/ 19.18)  SPINDLE CENTER SLEEVE Ø85mm Taper 1 / 19.18 x MT5  SPINDLE BORE Ø80mm  SPINDLE   SPEED GEAR STEPS M CODE AUTOMATIC 4 STEPS RANGE M41 : 20~60RPM M43 : 201~670RPM M42 : 61~200RPM M44 : 671~2000RPM  Infinitely Variable  CROSS SLIDE & CARRIAGE  CROSS SLIDE TRAVEL  (X-AXIS) 300mm  LONGITUDINAL TRAVEL  (Z-AXIS) 720mm 1220mm 1720mm 2720mm  AC SERVO MOTOR  (X / Z AXIS) 1.3 KW, 8.34 N.m / 2.9 KW, 18.6 N.m  DIA. OF BALL SCREW  (X / Z AXIS) Ø25mm, P5 C5 / Ø50mm, P10 C5  RAPID TRAVERSE SPEED  (X / Z AXIS) 7.5M/min. / 10M/min.  TURRET  TOOL STATION Manual 4 way tool post (Hydraulic VDI V8-OPT.) (Hydraulic P8 turret-OPT.)  SIZE OF EXTERNAL  TURNING TOOL 25mm 25mm 25mm  BORING BAR DIAMETER   Ø40mm Ø32mm  TAILSTOCK  QUILL DIAMETER Ø85mm  QUILL TRAVEL 178mm  TAPER OF CENTER MT5  MOTOR  MAIN SPINDLE Inverter Motor AC 11kw (15HP). Inverter (15HP)  HYDRAULIC OIL PUMP OPT. 0.75KW (1HP), OPT. 1.5KW (2HP)  FORCED LUBRICATION   FOR HEADSTOCK 1/4 HP  AUTOMATIC GEAR SHIFT 60W-OPT.  COOLANT PUMP 1/6 HP  TANK CAPACITY  HYDRAULIC TANK OPT. 25 LITER (5.5GAL.), OPT. 40 LITER (8.8 GAL.)  COOLANT TANK 60L  (13.2 GAL.) 120L  (26.4 GAL.) 180L  (39.6 GAL.) 240L  (52.8 GAL.)  MEASUREMENT  NET/ GROSS WEIGHT (kgs) 4050 / 4450 4400 / 4900 4800 / 5400 5300 / 6000  PACKING SIZE   (L x W x H) (mm) 3200x 2300 x 2240 3700x 2300 x 2240 4200 x 2300 x 2240 5200 x 2300 x 2240 *The above specifications are subject to change without prior notice.