BMT 2060AS

BMT 2060ASV

 

BMT 1740AS(ASV)/ 1760AS(ASV)/1780AS(ASV)/ 2040AS(ASV)/ 2060AS(ASV)/ 2080AS(ASV)

SPECIFICATION:  MODEL BMT 1740AS 1740ASV BMT 1760AS 1760ASV BMT 1780AS 1780ASV BMT 2040AS 2040ASV BMT 2060AS 2060ASV BMT 2080AS 2080ASV  CAPACITY  SWING OVER BED 440mm 510mm  SWING OVER CROSS SLIDE 272mm 342mm  HEIGHT OF CENTER 220mm 255mm  DISTANCE BETWEEN CENTER(mm) 1000 1500 2000 1000 1500 2000  BED  WIDTH OF BED 330mm  LENGTH OF BED (mm) 2000 2510 3020 2000 2510 3020  SWING OVER GAP 660mm 730mm  LENGTH OF GAP 300mm 300mm  WIDTH IN FRONT OF FACEPLATE 190mm 175mm  SPINDLE  SPINDLE NOSE D1-8 camlock  SPINDLE BORE 82mm  TAPER OF  SPINDLE BORE M.T.NO.5  NO. OF SPINDLE SPEED 12STEPS (AS series) , 3 STEPS (ASV series)  RANGE OF SPINDLE SPEED 20~1800RPM (AS series) , 10~2000RPM (ASV series)  TOOL SLIDE  TRAVEL OF CROSS SLIDE 260mm  TRAVEL OF TOP SLIDE 130mm  MAX. SIZE CUTTING TOOL 25mm  TAIL STOCK  TRAVEL OF TAIL STOCK 150mm  TAPER IN TAILSTOCK M.T.NO.5  DIAMETER OF BARREL 65mm  THREAD  LEADSCREW DIAMETER & PITCH DIA. 35mm , Pitch 6mm / 4 D.P.I.  INNCH THREADS 2-72 T.P.I. (48Nos)  METRIC THREADS 0.2-14mm (48Nos)  MODULE PITCHES 0.2-3.5 M.P.(24Nos)  DIAMETRAL PITCHES 8-60 DP (24Nos)  FEEDS  FEED ROD DIAMETER Dia. 25mm  NO. OF FEED CHANGE 36  RANGE OF LONGITUDINAL FEEDS 0.06-2.0mm/rev. , 0.0025-0.07 in/rev.  RANGE OF CROSS FEEDS 0.03-0.8mm/rev. , 0.0010-0.03 in/rev.(40 Nos)  MOTOR  MAIN SPINDLE MOTOR 10HP  COOLANT PUMP MOTOR 1/8HP , 0.1kw    NET WEIGHT (kgs) 1900 2000 2200 2000 2100 2300 *The above specifications are subject to change without prior notice.